5-Day Workout Split: Upper/Lower/Push/Pull/Legs Plan
Published by Liftlog+ · Updated
A 5-day workout split can combine upper body, lower body, push, pull and legs, with two rest days. One workable week is Monday upper, Tuesday lower, Wednesday rest, Thursday push, Friday pull, Saturday legs and Sunday rest. The point is to spread a manageable workload across five visits—not to add a fifth workout on top of an already full four-day plan.
Below is a complete gym template for generally healthy adults who already train consistently, know the listed movements and prefer five visits. Its goal is muscle building and general strength, not maximal-lift competition or specialization for every muscle. If you are still learning the basics, use the three-day beginner plan. If four visits fit better, the four-day upper/lower plan remains a valid choice.
The weekly schedule
| Day | Workout | Working sets | Allow roughly |
|---|---|---|---|
| Monday | Upper: presses and pulls | 10 | 35–50 minutes |
| Tuesday | Lower: squat, hinge and accessories | 12 | 45–65 minutes |
| Wednesday | No workout from this plan | — | Rest or ordinary easy activity |
| Thursday | Push: chest, shoulders and triceps | 13 | 40–60 minutes |
| Friday | Pull: back and biceps | 9 | 30–45 minutes |
| Saturday | Legs: repeat Tuesday’s lower workout | 12 | 45–65 minutes |
| Sunday | No workout from this plan | — | Recover before Monday |
These are planning estimates including warm-up, rests and equipment changes. They do not include travel, and a busy gym can take longer. The shorter pull day does not need extra exercises simply to match the other days.
You need dumbbells, a flat bench and stable seated-press setup, a barbell and squat rack with safeties, a low cable row, a pulldown station, a high cable with V-bar attachment, leg-curl and standing calf-raise machines, and floor space. Familiar alternatives are listed later.
This template uses the same 56 weekly working sets as our four-day plan, arranged differently. The two 16-set upper workouts become three sessions of 10, 13 and 9 sets; lower-body work stays at 24 sets. That makes the fifth visit a scheduling choice rather than an automatic volume increase. It also concentrates some isolation work into one session, which may or may not suit you.
How hard to train, and how to start
All table sets are working sets. Finish an exercise’s sets before moving on; this is not a circuit. For rep-based movements, choose loads that leave an estimated two or three controlled repetitions in reserve at the end of each set. Stop earlier if technique changes or you cannot control the movement. You do not need to test failure to estimate your effort.
Start with several minutes of easy movement, then rehearse the first loaded exercise with light sets, gradually approaching the working load without tiring yourself out. Prepare each new movement with an easy practice set or additional ramps as needed; being warm from pressing does not establish your row setup. The warm-up guide gives example ramps without requiring a one-rep-max test.
For the first session, select a load that allows at least the bottom of the rep range with that buffer. Reduce it if you cannot reach the minimum without grinding; make only a small increase if it is clearly too easy. Rest longer than the table suggests when you are not ready to repeat a controlled set. See the rest-between-sets guide for timing decisions.
If this is more work than your current routine, do not jump straight to the full tables. An introductory version caps every rep-based exercise at two sets and retains two plank holds: 8 upper, 10 lower, 8 push, 6 pull and 10 legs sets, or 42 total. Even that may exceed your current dose. Keep your existing routine if necessary, or get help making a smaller transition. Add a set to one exercise at a time only when performance and recovery remain manageable; reaching the full dose is not a deadline.
Monday: upper body
| Exercise | Sets | Reps | Rest between sets |
|---|---|---|---|
| Dumbbell bench press | 3 | 8–12 | 2–3 minutes |
| Seated cable row, overhand grip | 3 | 8–12 | 2–3 minutes |
| Dumbbell seated shoulder press | 2 | 8–12 | 2–3 minutes |
| Cable wide-grip lat pulldown | 2 | 8–12 | 2–3 minutes |
Use a flat bench for the chest press, with palms facing forward. Learn a controlled way to get the dumbbells into and out of position before loading heavily. For the shoulder press, sit on a stable bench with palms facing forward. Row with palms down, without swinging backward. Pulldowns use a wide overhand grip, with the bar traveling in front of your head toward the upper chest.
There are no separate curls or pushdowns on Monday, but the arms still contribute to the presses and pulls. Their work has not disappeared just because there is no arm-isolation row in this table.
Tuesday: lower body
| Exercise | Sets | Reps or time | Rest between sets |
|---|---|---|---|
| Barbell squat | 3 | 8–12 reps | 2–3 minutes |
| Dumbbell Romanian deadlift | 3 | 8–12 reps | 2–3 minutes |
| Machine lying leg curl | 2 | 10–15 reps | 1–2 minutes |
| Machine standing calf raise | 2 | 10–15 reps | 1–2 minutes |
| Front plank | 2 | 20–40 seconds | About 1 minute |
The squat is a barbell back squat. Use correctly positioned rack safeties and learn the setup and how to end a set safely from someone qualified. Do not use this template as a first lesson in heavy squatting. Descend only as far as you can maintain control and balance; a familiar substitute is preferable to an unfamiliar loaded movement.
For the Romanian deadlift, start standing, keep a slight knee bend and move your hips back with the dumbbells close to your legs. Stop the descent before losing control; touching the floor is not the objective. Adjust the leg-curl machine to fit and keep your hips against the pad. Raise and lower the heels on calf raises without bouncing. Hold the plank on forearms and toes, breathing normally; end the hold before your hips sag or position breaks down.
Stop an exercise that causes pain. An equipment swap is not permission to train through it; persistent or concerning symptoms need appropriate professional assessment.
Thursday: push
| Exercise | Sets | Reps | Rest between sets |
|---|---|---|---|
| Dumbbell bench press | 3 | 8–12 | 2–3 minutes |
| Dumbbell seated shoulder press | 2 | 8–12 | 2–3 minutes |
| Dumbbell lateral raise | 4 | 10–15 | 1–2 minutes |
| Cable triceps pushdown with V bar | 4 | 10–15 | 1–2 minutes |
Keep the same pressing variations as Monday. Perform lateral raises standing, with a small elbow bend and no heaving of the torso. For pushdowns, use the V-shaped attachment on a high pulley and keep the elbows near your sides.
The four sets of lateral raises and pushdowns are the week’s direct work for those exercises, not four sets to repeat on every upper-body day. Maintain the effort buffer across all four; lower the load if fatigue would otherwise push you outside the range. There is no requirement to keep a weight that only suited the first set.
Friday: pull
| Exercise | Sets | Reps | Rest between sets |
|---|---|---|---|
| Seated cable row, overhand grip | 3 | 8–12 | 2–3 minutes |
| Cable wide-grip lat pulldown | 2 | 8–12 | 2–3 minutes |
| Dumbbell biceps curl | 4 | 10–15 | 1–2 minutes |
Repeat Monday’s pulling variations. Curl both dumbbells together with palms facing up and the upper arms reasonably still. These four curl sets are additional to the biceps’ contribution to rows and pulldowns—not its entire weekly workload.
There is deliberately no deadlift on pull day: the hip hinge belongs on the two lower sessions, including tomorrow’s. Push and pull use different main actions, but their demands are not completely separate. If Thursday leaves you unable to train comfortably on Friday, take a rest day and shift the sequence rather than forcing the calendar.
Saturday: legs
Repeat Tuesday’s complete lower-body table: three squat sets, three dumbbell Romanian-deadlift sets, two lying leg-curl sets, two standing calf-raise sets and two plank holds, with the same ranges and rests. Repeating the session makes the log easier to compare; five visits do not require five different exercise menus.
Friday’s pulling can still leave your grip or back tired. If that compromises Saturday’s hinge or squat setup, delay the session or reduce its load or set count. Do not compensate by rushing technique. Sunday remains a rest day in the regular schedule.
Audit the weekly work before adding more
| Work tracked directly | Weekly sets at the full dose | Where it occurs |
|---|---|---|
| Chest press | 6 | Monday 3 + Thursday 3 |
| Rows | 6 | Monday 3 + Friday 3 |
| Pulldowns | 4 | Monday 2 + Friday 2 |
| Overhead press | 4 | Monday 2 + Thursday 2 |
| Lateral raises | 4 | Thursday |
| Biceps curls | 4 | Friday |
| Triceps pushdowns | 4 | Thursday |
| Squats | 6 | Tuesday 3 + Saturday 3 |
| Romanian deadlifts | 6 | Tuesday 3 + Saturday 3 |
| Leg curls | 4 | Tuesday 2 + Saturday 2 |
| Calf raises | 4 | Tuesday 2 + Saturday 2 |
| Plank holds | 4 | Tuesday 2 + Saturday 2 |
That totals 56 working sets/holds, not 56 sets per muscle. For example, chest gets six direct pressing sets; the back has six rows and four pulldowns, not ten identical sets for every back muscle. Squats and hinges both involve the glutes, while the hamstrings have hinge and knee-flexion work. Do not add each compound set as a full direct set to every muscle involved.
Most major movement patterns appear twice weekly; curls, pushdowns and lateral raises are concentrated into one day each. This is not a claim that every muscle receives two direct sessions or the same dose.
The 2026 ACSM overview found that higher weekly volume can enhance hypertrophy, but it could not establish an exact optimal set count for each person. This plan is a manageable template, not a maximum-growth prescription: six direct chest sets or four calf sets are not universal ideals. Start from your existing workload and response rather than treating five attendance days as evidence that you need more sets.
Progress each exercise in its own context
Keep the same working load while building repetitions within the range. When all sets reach the top of the range with controlled technique and the intended buffer on two comparable appearances, try the smallest practical load increase next time. This two-appearance rule is a conservative choice for this plan, not a research-established threshold.
Compare Monday upper with Monday upper, and Thursday push with Thursday push. The shoulder press follows a row on Monday but not on Thursday; its performance may differ even with the same equipment. You can use different loads in those slots. Likewise, compare Friday pulls with Friday pulls rather than interpreting every difference from Monday as a gain or loss of strength.
Example: Thursday’s three bench-press sets
These are hypothetical entries, not a promised weekly progress rate. Kilograms and pounds illustrate separate dumbbell racks, not exact conversions; loads are per hand.
| Comparable push session | Load per hand | Reps | Decision |
|---|---|---|---|
| First entry | 16 kg or 35 lb | 12, 11, 10 | Keep the load |
| Later entry | Same | 12, 12, 12 | Confirm on another comparable push session |
| Next comparable entry | Same | 12, 12, 12 | If the buffer remains, try a small increase |
| After increasing | 17 kg or 37.5 lb, if available | 10, 9, 8 | Build reps at the new load |
If the increase drops you below the lower limit or removes the effort buffer, return to the previous load or use a smaller increment. If you reduced the load within a session, record each set’s actual load rather than treating it as a same-load progression test. The double-progression guide covers uneven sets and large dumbbell jumps.
For planks, add a few seconds only with sound position and normal breathing. Once both holds reach 40 seconds comfortably, maintain them; seek instruction before choosing a harder variation rather than extending holds indefinitely.
Log actual reps, load, effort and relevant setup changes. Record barbell loads including the bar, dumbbells per hand, and machine identity/settings. A simple workout log is sufficient; no app is required.
Substitutions and occupied equipment
Use a familiar replacement with the original set count, rep range and effort target, but choose its starting load afresh. Keep it consistent across future sessions. Equipment loads are not interchangeable.
| Original exercise | Available alternative | Important distinction |
|---|---|---|
| Barbell squat | Machine seated leg press | Retains knee-dominant work, not squat practice. Adjust the seat, use the safety mechanism and keep your pelvis supported. |
| Barbell squat | Dumbbell goblet squat | Hold one dumbbell close to the chest; holding capacity may become the limit. |
| Dumbbell bench press | Machine chest press | Use the seated machine with handles at comfortable chest height, not a copied dumbbell load. |
| Dumbbell seated shoulder press | Machine seated shoulder press | Adjust the supported seat and handles for a comfortable overhead path. |
| Machine lying leg curl | Machine seated leg curl | Retains knee flexion but changes hip position; adjust the pads before loading. |
If a station is temporarily busy, wait or move a later exercise forward and note the order change. Do not count that altered session as a clean comparison for a load-increase decision. If no familiar alternative exists, omit that exercise once rather than inventing a movement under pressure. For example, more leg curls would not replace the hip-hinge role of the Romanian deadlift. Recurring access problems call for a deliberately revised plan, not daily improvisation.
Missed days, stalls and recovery
Missed Thursday? Keep the sequence instead of squeezing two sessions into Friday: do push Friday, pull Saturday, rest Sunday, legs Monday, rest Tuesday, then upper Wednesday. Resume the sequence from there. This example preserves a break before the next upper session; it does not promise that everyone will recover on that timetable. Keep rest days when shifting workouts and add more when needed. Never double sets to repay a missed visit.
Only making four days most weeks? Switch to the four-day plan rather than regularly dropping legs or compressing five sessions. If only two or three visits are reliable, choose a full-body routine. A schedule you can repeat is more useful than one you continually repair.
Performance declining across several sessions? Check rest, technique, changes in equipment, sleep and other training demands before adding work. If a load repeatedly forces you below the rep range, reduce it and rebuild. If recovery is the problem, use fewer sets, add rest days or return to a lower-frequency plan. Persistent pain or loss of normal movement needs assessment, not a progression workaround.
One exercise stalled but recovery is good? Keep the other exercises stable and review that lift’s setup and load increments. Seek individual programming help if needed; do not increase every muscle’s workload in response to one stalled curl. After a longer break, reassess starting loads rather than immediately resuming the full dose.
Is five days better for muscle growth?
Not automatically. A 2024 systematic review and meta-analysis found similar average strength and muscle-growth results from split and full-body training when volume was matched. That supports choosing a workable structure; it does not prove this five-day hybrid is superior, or that every routine produces identical results.
The ACSM overview likewise found no clear hypertrophy advantage from higher frequency when total volume was equated, and does not require every set to reach failure. It discusses a two-to-three-rep buffer while acknowledging uncertainty about exact effort targets. The schedule, load rules and effort buffer here are practical choices, not a uniquely proven formula.
Choose five days if you value separating push and pull work, can sustain the extra trip and recover from the planned workload. Keep a simpler schedule if it already works. This plan replaces a routine; it is not an add-on to one.
Sources and scope
This is general training guidance for healthy adults, not individualized coaching or a clinically tested program. The exact exercise allocation, rest ranges, introductory dose, progression rule and example logs are editorial choices. No personal training results or qualified expert endorsement are claimed.
- Ramos-Campo and colleagues, 2024: Efficacy of Split Versus Full-Body Resistance Training on Strength and Muscle Growth: A Systematic Review With Meta-Analysis. DOI: 10.1519/JSC.0000000000004774. Abstract consulted. Matched-volume average findings do not validate this exact five-day routine.
- ACSM, 2026: Resistance Training Prescription for Muscle Function, Hypertrophy, and Physical Performance in Healthy Adults: An Overview of Reviews. DOI: 10.1249/MSS.0000000000003897. Relevant full-text hypertrophy, programming and limitations sections consulted. The review searched through October 2024; group-level evidence does not identify each person’s ideal workload or exact effort target.
For general information only—not personalized training or medical advice. Historical routines may vary by source; adapt workouts to your experience and consult a qualified professional if needed.